LMZL系列粉碎整粒機適用于制藥、食品、精細化工加工工業,符合GMP規范的物料粉碎整粒加工設備。本機全部采用不銹鋼材料制造。
?
產品簡介Product introduction
LMF系列粉碎整粒機適用于制藥、食品、精細化工加工工業,符合GMP規范的物料粉碎整粒加工設備。本機全部采用不銹鋼材料制造。
The LMF series crushing and pelletizing machine is suitable for the pharmaceutical, food, and fine chemical processing industries, and is a material crushing and pelletizing processing equipment that complies with GMP standards. This machine is entirely made of stainless steel material.
工作原理Working principle
加工的原料進入粉碎整粒機的進料口后,落入錐形工作室 ,由旋轉回轉刀對原料起旋流作用,并以離心力將顆粒甩向篩網面,同時由于回轉刀的高速旋轉與篩網面產生剪切作用,顆粒在回轉刀與篩網間被粉碎成小顆粒并經篩網孔排出。粉碎的顆粒大小,由篩網的目數,回轉刀與篩網之間的間距以及回轉轉速的快慢來調節。
After the processed raw materials enter the feeding port of the crushing and pelletizing machine, they fall into the conical working chamber. The rotating rotary knife swirls the raw materials and throws the particles towards the screen surface with centrifugal force. At the same time, due to the high-speed rotation of the rotary knife and the shear effect on the screen surface, the particles are crushed into small particles between the rotary knife and the screen and discharged through the screen hole. The size of the crushed particles is adjusted by the mesh size of the sieve, the distance between the rotary blade and the sieve, and the speed of rotation.
應用范圍Application scope
制藥——原料粉碎Pharmaceutical - Raw material crushing
——濕料制粒Wet material granulation
——干料整粒Dry material whole grain
——不合要求的藥片,需回收利用的可按顆粒度的大小要求進行整粒Unqualified tablets that need to be recycled can be packaged according to the particle size requirements
食品——餅干粉碎回收利用Food - Biscuit Crushing and Recycling
其他——粗狀原料的粉碎和整粒Other - Crushing and whole granulation of coarse raw materials
——塊狀原料的粉碎和整粒Crushing and whole granulation of bulk raw materials
設備特點Equipment characteristics
徹底解決了擺式顆粒機篩網磨損碎屑污染物料的難題。
獨有軸密封專利,保證潤滑油不泄露。
控制粒度容易。
無滯留死角,無物料過熱弊病。
粉塵少,無振動、噪音低。
高效節能,生產能力大。
造型美觀,便于清洗。
A型機適用于100級車間的工作要求。
Thoroughly solved the problem of material contamination caused by wear and debris on the screen of the pendulum granulator.
Unique shaft sealing patent ensures that lubricating oil does not leak.
Easy to control granularity.
No dead corners or material overheating problems.
Low dust, no vibration, and low noise.
Efficient and energy-saving, with large production capacity.
Beautiful appearance, easy to clean.
The A-type machine is suitable for the work requirements of the 100 level workshop.
技術參數表Technical parameter table
型號model | LMFS-100 | LMFS-150 | LMFS-300 | LMFS-450 | LMFS-700 | LMFS-1000 |
產量output per hour | 10-100kg/h | 15-150kg/h | 30-300kg/h | 45-450kg/h | 70-700kg/h | 100-1000kg/h |
粒度particle size | 0.3-6mm | 0.3-6mm | 0.3-6mm | 0.3-6mm | 0.3-6mm | 0.3-6mm |
傳動座溫升Transmission seat temperature rise | <30℃ | <30℃ | <30℃ | <30℃ | <30℃ | <30℃ |
調速范圍speed range | 變頻調速1-2000rpm Frequency Control | |||||
電機功率power | 0.75kW | 1.5kW | 1.5kW | 2.2kW | 3kW | 5.5kW |
長×寬×高length×width×heigth | 850×500×1050mm | 720×445×1345mm | 810×445×1345mm | 920×445×1430mm | 1000×500×1530mm | 1100×550×1785mm |
出料口高度Discharge port height | 600mm | 650mm | 650mm | 690mm | 690mm | 710mm |
注:設備產量僅供參考,具體產量以實際測試為準,
Note: The equipment output is for reference only, and the specific output is subject to actual testing