911国产传媒在线麻豆-911国产亚洲精品青衣-911国产影院在线观看-911国产在线观看精品-911国产在线观看无码专区-911国产自产精品

 
張家港樂馬機械制造有限公司
當前位置:
CASE
應用案例
針棒式粉碎機
    發布時間: 2024-02-29 15:04    

本機無篩。無網。無死角。清洗方便。適合一般粉碎機難以粉碎的物料如︰花生,黃豆,辣椒,棗子等粘度大,糖份多,有油性,有水份的物料。(粉碎前無需對物料烘干)。不同的物料可以更換不同的刀具來達到理想的粉碎效果。同樣也可以粉碎一般的物料產量比普通粉碎機高

針棒式粉碎機

設備簡介Equipment Introduction

本機無篩。無網。無死角。清洗方便。適合一般粉碎機難以粉碎的物料如︰花生,黃豆,辣椒,棗子等粘度大,糖份多,有油性,有水份的物料。(粉碎前無需對物料烘干)。不同的物料可以更換不同的刀具來達到理想的粉碎效果。同樣也可以粉碎一般的物料產量比普通粉碎機高。

Needle and stick crushers are suitable for materials that are difficult to crush with general crushers, such as peanuts, coffee beans, soybeans, etc., which have high viscosity, high sugar content, oil content, and water content. (There is no need to dry the material before crushing). Different materials can be replaced with different cutting tools to achieve the desired crushing effect. It can also crush general materials with a higher yield than ordinary crushers.


應用范圍Application scope

  本機無篩。無網。無死角。清洗方便。適合一般粉碎機難以粉碎的物料如︰花生,黃豆,辣椒,棗子等粘度大,糖份多,有油性,有水份的物料。(粉碎前無需對物料烘干)。不同的物料可以更換不同的刀具來達到理想的粉碎效果。同樣也可以粉碎一般的物料產量比普通粉碎機高。

This machine has no screen. No network. No dead corners. Easy to clean. Suitable for materials that are difficult to crush with general crushers, such as peanuts, soybeans, chili peppers, dates, etc., which have high viscosity, high sugar content, oily properties, and moisture. (There is no need to dry the material before crushing). Different materials can be replaced with different cutting tools to achieve the desired crushing effect. It can also crush general materials with a higher yield than ordinary crushers.


工作原理operational principle

物料由料斗經過輸送器進入粉碎室后被兩組高速相對旋轉的粉碎刀相撞擊和剪切粉碎。粉碎濕的物料時粉碎后的物料通過輸送器排出。排出達到要求的產品。通過變頻調節兩組刀盤的轉速來獲得所需物料的粒度。

The material enters the crushing chamber from the hopper through the conveyor and is collided and sheared by two sets of high-speed rotating crushing knives. When crushing wet materials, the crushed materials are discharged through a conveyor. Discharge products that meet the requirements. By adjusting the rotational speed of two sets of cutterheads through frequency conversion, the required material particle size can be obtained.


設備特點Equipment characteristics

  • 該機結構新穎合理,簡單緊湊,體積小,效益高,外形美觀易磨損件便于更換。   

  • 精確選擇轉子和定子之間間隙和相應轉子外端速度,使粉碎過程處于理想狀態。

  • 本機密封性能好,內置迷宮式密封,機門”0“型密封圈,無粉塵外溢。

  • 粉碎室出料空間大,由于轉速高速旋轉,帶進大量空氣,因而有自冷功能,使用部分熱敏性物料粉碎。

  • 適用于易碎堅韌的彈性物料以及干的和高含水量的結晶物料。產品細度<50μm,可以通過調整轉子的速度或者改變針棒的數量和排列來改變產品的細度。 

  • The machine has a novel and reasonable structure, is simple and compact, has a small volume, high efficiency, and a beautiful appearance, making it easy to replace easily worn parts.

  • Accurately select the gap between the rotor and stator and the corresponding outer end speed of the rotor to ensure that the crushing process is in an ideal state.

  • This machine has good sealing performance, with a built-in labyrinth seal and a "0" - shaped sealing ring on the door, ensuring no dust leakage.

  • The discharge space of the crushing chamber is large, and due to the high-speed rotation, a large amount of air is brought in, which has a self cooling function and uses some thermosensitive materials for crushing.

  • Suitable for fragile and tough elastic materials as well as dry and high moisture crystalline materials. Product fineness<50 μ m. The fineness of the product can be changed by adjusting the speed of the rotor or changing the number and arrangement of needle rods.


產品技術Technology

  • 細度范圍可從60目到200

  • 細度可通過轉子速度的調整和研磨工具的選擇來設定

  • 相對線速度最高可達150m/sec

  • 可以處理莫氏硬度2-3.5的不同種類的物料

  • 操作簡單,易清洗

  • 適用范圍從實驗室機型到大型生產機型


技術參數表Technical parameter table

型號model

生產能力output per hour

進料粒度Feed size

粉碎細度Crushing fineness 

主軸轉速speed

總功率power

*寬*高length*width*height 

重量weight

LMZB-250

50-200Kg/h

<6mm

60-200mesh

5000/2900r/min

13.35kw

1.4*1.3*1.5m

600kg

LMZB-350

100-500Kg/h

<8mm

60-200mesh

4200/2500r/min

18.35kw

1.5*1.5*1.5m

1000kg

LMZB-450

150-800Kg/h

<8mm

60-200mesh

3500/2200r/min

27.85kw

1.6*1.7*1.7m

1500kg

LMZB-650

250-1000Kg/h

<10mm

60-200mesh

3000/2000r/min

42.85kw

2*1.9*2m

2300kg


注:設備產量僅供參考,具體產量以實際測試為準,

Note: The equipment output is for reference only, and the specific output is subject to actual testing


該機設計靈活,多種結構可選,可根據用戶生產需要定制設備

The machine is designed flexibly with multiple structures to choose from, and can be customized according to user production needs

【多種制作材料可選】 Multiple production materials available

(1)201不銹鋼(2)304L不銹鋼(3)316L不銹鋼(4)用戶指定材料

以上材料可單獨適用也可混合使用,也可以采用用戶指定材料制作

(1) 201 stainless steel (2) 304L stainless steel (3) 316L stainless steel (4) User specified material

The above materials can be used separately or mixed together, or can be made from materials specified by the user


【降溫方式可選】Cooling method optional

     該機粉碎大部分物料不需要增加降溫裝置,但是粉碎一些特別熱敏性物料時需要增加降溫裝置,以防止物料受熱變性,物料粘壁堆積或篩網堵塞等現象。降溫方式有兩種:分別是水冷式和風冷式。

This machine does not require the addition of a cooling device for crushing most materials, but for crushing some particularly heat sensitive materials, a cooling device needs to be added to prevent material denaturation, wall sticking, or screen blockage. There are two cooling methods: water-cooled and air-cooled.

水冷式:該機有兩個部位可加水

冷裝置分別是:粉碎主軸部位和

粉碎倉壁部位,水源可使用普通

常溫自來水或使用水冷機制冷后

的低溫液體。制冷效果取決于水

風冷式:在水冷的基礎上增加冷

風機,冷風機出風管道連接粉碎

機粉碎倉,連續向粉碎倉注入低

溫冷風,冷風與粉碎齒盤和物料

直接接觸降溫效果更佳。制冷效

果取決于冷風機制冷溫度。


【電機電器可選】Optional

 motor and electrical 

appliances

該機常用電機有三種:普通電機,

防塵防水電機和防爆電機。對于

一些特殊物料,電器開關也可采

用防爆開關或防爆式電器箱。另

外還可以增加變頻器調節粉碎齒

盤轉速。


【加料方式可選】Optional feeding method

  對于一些流動型較好或者較差的物料,為了防止物料進料速度太快或下料不穩定現象,可增加小螺旋定量喂料裝置,設置好進料速度后,將物料倒入加料倉不需要人看守。另外還可在加料倉上增加其他輸送設備,比如螺旋加料機、真空加料機、皮帶輸送機等連接其他設備直接向粉碎機投料。

For some materials with good or poor fluidity, in order to prevent the phenomenon of too fast feeding speed or unstable feeding, a small spiral quantitative feeding device can be added. After setting the feeding speed, the materials can be poured into the feeding bin without the need for human supervision. In addition, other conveying equipment can be added to the feeding bin, such as screw feeders, vacuum feeders, belt conveyors, etc., which can be connected to other equipment and directly fed into the crusher.


【出料方式可選】Optional discharge method

  該機出料方式有多種:布袋收集式,料桶收集式,關風機控制式等,也可以在出料口處增加其他輸送設備,比如螺旋加料機、真空加料機、皮帶輸送機等將粉碎好的物料直接輸送到其他設備,如包裝機、混合機、反應釜等

There are various discharge methods for this machine: bag collection, bucket collection, fan control, etc. Other conveying equipment can also be added at the discharge port, such as screw feeder, vacuum feeder, belt conveyor, etc., to directly transport the crushed materials to other equipment, such as packaging machine, mixer, reaction kettle, etc


【設備機型可選】Optional device model

該機有多種機型可選:粉碎機單機式、簡易除塵式、旋風除塵式、脈沖除塵式等,用戶可根據自己的使用需求選擇機型

This machine has multiple models to choose from: single crusher, simple dust removal, cyclone dust removal, pulse dust removal, etc. Users can choose the model according to their own usage needs

【粉碎機單機式】該機型出料方式為布袋收集式,出料口連接一個布袋并且密封,粉碎好的物料進入布袋,裝滿后將布袋打開倒入包裝袋,該機型適合小批量生產或者物料濕度高的物料【簡易除塵式】該機型在粉碎機基礎上增加了除塵箱,出料方式為布袋收集式或者料桶收集式,該機型清理方便,適合多種物料頻繁交替使用。除塵箱過濾袋清理方式手動搖桿拍打式
【旋風除塵式】該機型在簡易除塵的基礎上增加了旋風分離器和星型卸料閥。該機除塵效果好,出料方便,只要在出料口下面放置料桶或者包裝袋即可,不需要密封。也可在出料口處連接其他輸送機,直接將粉碎好的物料輸送到其他設備,如包裝機、混合機、反應釜等。除塵箱過濾袋清理方式手動搖桿拍打式【脈沖除塵式】該機在旋風除塵的基礎上增加了脈沖反吹裝置,該機除具備旋風除塵設備所有優點外又優化了過濾袋清理方式,將手動搖桿拍打方式改為通過噴吹壓縮空氣的方法除掉過濾袋上附著的粉塵。該機自動化程度高。操作更方便



主站蜘蛛池模板: 人妻少妇精品中文字幕av蜜桃| 国产精品一区二区免费| 国产色播| 色91盒子| 国产亚洲视频免费播放| 欧美黑人添添高潮A片视频| 国产综合久久久久鬼色| 天美网站传媒入口网址| 国产欧美一区二区三区久久| 性猛交富婆ⅹxxx乱大交| 性色香蕉AV久久久天天网| 日韩久久综合| 亚洲欧美制服丝袜一区二区三区| 少妇毛又多又黑A片欧美| 国产女主播91| 看片地址| 免费视频精品一区二区| 亚洲精品中文字幕乱码| 精品AV一区二区五区| 国产亚洲欧美日韩国产片| 成人电亚洲在线| 久久瑟瑟| 国产手机在线播放| 亚洲、国产综合视频| 久久99国产精品片久久99蜜桃| 在线涩涩免费观看国产精品| 免费一级毛片视频| 国产毛片| 日韩欧美三级视频| AV怡红院AV男人的天堂| 国产精品日本无码久久一| 国产99区| 校花高潮一区日韩| 日本波多野结衣在线| 91羞羞网站| 日韩亚洲人成在线| 91视频永久入口| 午夜A级理论片左线播放| 国产精品免费一区二区三区在线| 亚洲欧美国产成人综合不卡| 男女午夜精华液|